Product Image
(1/1)
Product Image
(1/1)
OR
1 x 9 Channels NVR, MPEG-4 Streaming
9 x MPEG-4 Video Compression Network Encoder
9 x Sony 1/3" Chip Wired Infra-Red 12 LED Day&Night Color CCD Dome Camera
9 x Switched Adapter
2 x Seagate 1TB Hard Drive
9 x 1.5m Cable
![]() |
|
One Channel Network Encoder, is an IP-based encoder, and collect video or audio information real-time to encode and transport in the network. |
|
Video | ||
| Encoding Capability: | One BNC input | |
| Video Standard: | PAL/NTSC | |
| Video Compression: | MPEG-4 | |
| Image Resolution: | KDM2300(P):VGA CIF QCIF | |
| Max Frame Rate: | 25fps | |
| Video Compression Bit Rate: |
64Kbps - 2Mbps | |
|
Alarm | ||
| Alarm In/Out: | Normally open or close. The alarm out is normally open by default | |
![]() |
| User Login | |
| 1. | 1. Administrator and operator accounts with different authorizations for login. |
| 2. | An administrator can perform all operations while an operator has browsing rights only. |
| 3. | The usernames for either administrator or operator cannot be modified but the passwords can. |
| 4. | The encoders can register with the NVR platform. Userswith the same account or different accounts can use the MTC from different locations to login |
| Live video | |
| 1. | It is possible to browse videos from the MTC directly or via the NVR. |
| 2. | Up to five channels of concurrent video transmissions are supported. |
| 3. | It is possible to start or close video point-to-point transfer via the MTC. |
| 4. | Three channels of direct transmission are available by default, and three channels at maximum. |
| 5. | MPEG4 (CIF+QCIF) Dual stream function is supported. |
| 6. | Multicast function is supported. |
| Snapshot | |
| 1. | Snapshot can be obtained from the MTC. |
| 2. | The snapshot request from the NVR platform is supported. |
| 3. | The snapshot picture format is JPEG by default. |
| 4. | Related caption is overlaid on the snapshot according to the configuration of caption function. |
| Caption function | |
| 1. | Support three types of caption: system time, logo and alarm. |
| 2. | It is possible to set the location and contents for caption through the MTC or NVR. |
| 3. | You can select whether to show the logo or system time on monitoring video. |
| Alarm management | |
| 1. | Motion detection alarm, video loss alarm, memory usage alarm, CPU occupation alarm and DSP dead alarm are supported. |
| 2. | Up to four motion detection alarm regions are supported. |
| 3. | Extends alarm in interface by special alarm cards. |
| COM Control | |
| 1. | The COM (serial port) type is RS485. |
| 2. | The serial port can be configured via the MTC. |
| 3. | The serial port rates supported are 110, 300, 1200, 2400, 4800, 9600, 19200, 38400, 43000, 56000, 57600 and 115200. |
| Networking | |
| 1. | Static address configuration and DHCP dynamic allocation are supported. |
| 2. | By default, the device attempts to obtain the network address via DHCP on the first startup after restoration to factory settings. If no address is obtained in 10s, the static IP (192.168.0.99 by default) will be used, and then the user can determine whether to enable DHCP. |
| 3. | The IP address can be modified across network sections from the NVR. |
| 4. | There is no need to restart after modifying the IP address, subnet mask, gateway and platform registration address. |
| 5. | The PPPoE is supported, and the parameters are set on the MTC. Auto dialing upon disconnection is supported. |
| 6. | MTC can search devices according to multicast addresses. |
| 7. | DNS is supported. |
| 8. | NAT traversal is supported. |
| 9. | NVR auto networking is supported. |
| Upgrade | |
| 1. | updates by MTC, NVR Station or FTP. |
| Device management | |
| 1. | Remote control commands can be received for device parameter setting, device restart and factory settings restoration. |
| Serial port/telnet login | |
| 1. | Telnet to the encoders is supported. |
| 2. | Login via serial port is supported (serial rate is 38400bps). |
![]() |
![]() |
![]() |
| Channels: | 9 | |
| Streaming: | MPEG-4 | |
| Audio Standard: | G.711, G.721, G.726 | |
| Video Resolution: | CIF, QCIF | |
| Video Frame Rate: | 1-25 fps (PAL) 1-30 fps (NTSC) | |
| Video Bit Rate: | 64Kbps--2Mbps | |
| Audio Output: | 8Kbps--64Kbps | |
| Video Output: | 1 x BNC 1 x VGA | |
| Audio Input: | 1 x RCA 1 x MIC | |
| Audio Output: | 1 x RCA | |
| Alarm Input: | 2 | |
| Alarm Input: | 2 | |
| COM: | 1 x RS485 | |
| Hard Disk Interface: | 4 x SATA | |
| Network Interface: | 1 x 10/100M adaptive Ethernet | |
| USB Interface: | 1 x USB 2.0, extensible mouse, USB storage device, and so on | |
| Network Protocol: | TCP/IP, UDP, RTP/RTCP/RESP, FTP, Telent, NTP, HTTP, DHCP, SNMP, DDNS | |
| Maximum Power: | AC 100V-240V, 50Hz/60Hz | |
| Consumption: | 144.5w | |
| Operating Humidity: | 0℃~60℃ | |
| Operating Humidity: | 10%-90%(non condensing) | |
| Production Certification: | CCC, FCC, Rohs, CE |
![]() |
|
| 1. | With IP camera or video adapter, NVR brings full IP video surveillance solution. |
| 2. | With an existing network, you can complete rapid deployment of the entire system and exercise realtime monitoring and management over any object in any place at any time. |
| 3. | Deployed in a network center, NVP can access to all surveillance endpoints by using only one network cable, featuring low cabling cost, quick construction, simple installation and convenient maintenance. |
| 4. | Benefit from full IP network architecture, IP camera and NVR can be connected via IP network. |
| 5. | Therefore, system deployment can be done over the existing IP network, and furthermore, surveillance endpoints may be set in any network positions without any geographical restroction. |
![]() |
| NVR Live Video | |
| 1. | Multi-screen live view at the same time. |
| 2. | Multiple screen layouts. |
| 3. | Maximum 16 layout schemes. |
| 4. | Camera sequence and layout scheme sequence. |
| 5. | PTZ control at same time when live video is undergoing. |
| Recording and Replay | |
| 1. | Three recording mode: manual, schedule and alarm. |
| 2. | Record management policy: including record scheme setting, alarm recording policy setting, overwrite policy and camera recording policy. |
| 3. | Records management: including management, query, download and deletion of the records in PU, PC and external USB harddisk. |
| 4. | Records backup: DVD RW with USB interface, or USB harddisk. |
| 5. | Records download the records through the NVR station. |
| 6. | Records replay multi video replay, synchronous replay, alarm record replay, and controlled play (such as fast forward, exit), search records according to time setting and replay quickly. |
| Calling | |
| 1. | Voice calling and record for calling. |
| 2. | Calling one to one, and broadcast to all. |
| 3. | Silent and mute mode are supported. |
| 4. | Voice tuning. |
| Management | |
| 1. | User management: including adding/deleting user, user right management, online user management. |
| 2. | Log management: including management of various logs, login log, operation log, backup log, update log, alarm log, and so on . |
| 3. | Storage management: supporting harddisk partition, formatting and removal. |
| 4. | Parameter setting: setting various parameters of the NVR. |
| 5. | PU device management: supporting adding, deletion and parameter configuration of the PU encoder/decoder |
| 6. | Software update: supporting software version update through the NVR station, COM port and U disk. |
| Alarm | |
| 1. | Alarm capabilities: supporting alarm input (including alarm input alarm, motion detection alarm, video source loss alarm), event relationship output (including buzzer sound, alarm output, recording, snapshot, PTZ rotation to presets and caption). |
| 2. | Alarm management: unified management of PU and NVR alarms, event relationship policy setting and alarm query. |
| Video System: | PAL/NTSC/VGA (optional) | |
| Video Compression: | MPEG-4 | |
| Image Resolution: | QCIF, CIF, VGA | |
| Image Frame Rate: | 1/16~30F/S (adjustable) | |
| Code Rate: | 64kbps--1Mbps (adjustable) | |
| Audio Compression: | ADPCM | |
| Transport Delay: | <300ms | |
| Recording Mode: | Maximum alarm pre-recording duration: 60 seconds; maximum continuous recording duration after alarm generation/ recovery: 300 seconds | |
| Storage Policy: | Supporting storage with built-in harddisk, ecternal USB harddisk or disk array | |
| NVR Replay: | Simultaneous replay of four NVR channels | |
| Remote Replay: | Simultaneous replay of four channels at most | |
| PU Registration: | Supporting the registration of 16 Pus at most | |
| Records Backup: | Supporting backup with USB harddisk and USB DVD | |
| Records Download: | Supporting download through the NVR station | |
| External USB Harddisk: | Update NVR through U disk, COM port or the NVR Station | |
| Motion Detection: | Supporting a maximum of 16 blocks | |
| Arm/Disarm: | A maximum of four periods every day | |
| Video Source Loss Alarm: | Supported | |
| Networking in Complicated: | Supporting networking of networks of different telecom carriers, NAT traversal, and socks5 proxy | |
| Communication Protocol: | supporting DHCP, PPPOE, SNTP, DDNS, IEEE802.3, RTP, RTCP, and VSIP | |
| Operating Voltage: | 100VAC-263VAC | |
| Power Consumption of Integrated System: | 50W (rated) | |
| Input Voltage of Card: | 12V | |
| Maximum Input Current of Card: | 0.42A | |
| Mounting: | Horizontal mounting | |
| Operating Temperature: | 0℃~60℃ | |
| Humidity: | 10%--85%(non-condensing) | |
| Atmospheric Pressure: | 86--106 KPa |
Tell us what you think about this item and share youropinions with other people. Please make sure your review focuses only on this item.
All reviews are moderated and will be reviewed within two business days. Inappropriate reviews will not be posted.
After-sales questions and issues: Contact our Customer Service Department.
(A Customer representative will get back to you).
To write a new review, you should Sign In first.