Description:
This DVR select the adaptor is DC12V; please make sure the power supply voltage before use the machine.
If long time do not use the machine, please turn off the power of DVR machine, and let the electric plug away from power socket;
This DVR only for indoor use, as for prevent short circuit or electric danger, please do not let the DVR in the raining or humid area.
In case any solid or liquid inside the case of DVR, please turn off the power immediately, and ask the qualified technician check it before reboot the DVR;
The DVR is the precision machine, there is nothing for repair by customers themselves in it, when it break down, please ask the qualified technician to check and repair, or contact with the agents of it.
Specification:
-
Compression standard: H.264 baseline profile@L3.1
-
Video input: Composite 1.0Vp-p/75ohm, BNCx16
-
Video output: Composite 1.0Vp-p/75ohm, BNCx1; VGAx1
-
Resolution:
-Preview: 720x576(PAL),720x480(NTSC)
-
-Recording: CIF: 352x288(PAL), 320x240(NTSC)
-
Frame Preview: 400FPS(PAL), 480FPS(NTSC)
-
Frame Recording CIF:400FPS(PAL), 480FPS(NTSC)
-
Audio input: -8dB~22k,RCAx4
-
Audio output: -8dB~92dB,RCAx1
-
Audio decode: ADPCM
-
Alarm input: Input low level alarm, user setting normal open or normal close, 8ch input
-
Alarm output: 1ch input
-
Recording mode: Manual recording, timing recording, motion detection recording and external alarm recording
-
Simplex/duplex/ triplex: triplex(recording, playback, LAN transmission)
-
LAN: RJ45(10M/100M self-adapting)
-
PTZ control: Yes
-
Communication: RS485x1，USB2.0x1
-
USB: USB mouse control
-
Hard Disk: Support up to 1 x 2TB HDD
-
Remote control unit: Yes
-
Power supply: AC110/230V
Images:
Item Includes:
Product Reviews
Write a Review
Tell us what you think about this item and share youropinions with other people. Please make sure your review focuses only on this item.
All reviews are moderated and will be reviewed within two business days. Inappropriate reviews will not be posted.
After-sales questions and issues: Contact our Customer Service Department.
(A Customer representative will get back to you).
To write a new review, you should Sign In first.
INS-16DVR05 16CH H.264 480FPS Standalone Network CCTV DVR Manual
Downloads: 18
Download
5.05 MB
INS-16DVR05 16CH H.264 480FPS Standalone Network CCTV DVR Mobile_Client
Downloads: 9
Download
4.64 MB
INS-16DVR05 16CH H.264 480FPS Standalone Network CCTV DVR Client_CIF_D1_V3.3.2
Downloads: 11
Download
2.34 MB
12 Total, Page 1 of 3 [ First Previous Next Last ]
1. Why does the record video playback in mosaic under local DVR?
①The recording parameter setting is too low cause the record video quality overall down, sometime appears to mosaic;
②The record video file locates where there is a bad sector in a hard disk drive, it will cause the mosaic raising
2. Why does the video skew became deformed, color cast?
①Make sure the VGA cable and DVR be connected with grounding properly;
② The DVR working atmosphere temperature high, or no good in radiating, cause the VGA chipset working exceptional, or the mention circuit parameter is abnormal
3. Why do the color of live video and record video data distortion?
①Make sure the input and output video parameter of main menu setting correct;
②Make sure the connection is correct.
4. Why does the video like water wave, to appear obstruction distortion?
①if there is short circuit, open circuit or insufficient solder and connection failure of video cable?
②If the video cable obstruction by high voltage interference, please separate the video and high voltage in linkup cabling, at the meantime, please select the better quality, shield video cable for the project;
③In the whole system, only select the central point to grounding, please do not multi port to grounding, then, cause the common mode obstruction, please connect the screw in DVR rear panel to grounding.
④Check if there is the become old problem in the camera or TV monitor and cable.
5. Why does nothing display on the TV or VGA monitor?
①please make sure if the power supply of TV or VGA monitor turn on or not; if the illumination located in the lowest status;
②if the video connected with TV or VGA monitor properly? Check if there is any video signal input? And make sure the line faulty or not.
Product Images
(1/7)
All Reviews (1) | Write a Review
OR 
good product
